Sanders Now

Undoubtedly, the results delivered by power sanders are largely a consequence of the quality of paper used with them. Even the best and the fastest sander can’t remove enough material if the paper grit is too fine. Therefore, it becomes imperative to choose
appropriate grit or a series of grits for best results.

For removing large amount of material, a sand paper with lower grit number should be used. The number assigned to any sandpaper represents its roughness. For instance, a 50 grit sheet of paper is almost like having gravel glued down on a thin piece of cardboard and could be used only for very rough sanding. Medium grade sand papers fall in the range of 100-220 grit. The higher grits are best suited for sanding down a job to prepare it for final sanding with an even higher grit. These grits facilitate removing enough material and leave no deep sanding marks, making the final sanding easy.

The finishes grits with number above 220 are meant for removing very small amount of material and are ideally suitable for getting smooth material and removal of the final sanding marks left behind. Power sanders deliver a nearly perfect smooth finish on using higher grits. This is the last and final step of sanding while refinishing a table or some such piece of furniture.

Power sanders are certainly needed and prove better, if you want to finish the project quickly, than hand sanding and they give much better and even outcome. It’s you selection of paper that causes all the difference while using any sander. Remember, lower grit equals more removal of material and vice versa. You can get these sanders and the papers needed for the purpose by doing your research on the net.